Bleeding Dry brake system

[BrakeHelp]

Im planning on Rebuilding my CRG Master Cylinder and my VEN04 Rear Brake Caliper how do I go about bleeding the system after im done ?

[warx]

If it does not have a reservoir then I think you need to use a kit that screws in with a small bottle held about 15" up so it provides some head pressure.

Like this: www.fastech-racing.com/product.php?productid=616&cat=0&page=1

[BrakeHelp]

it does have a reservoir

[ron90]

Most karts don't really have a reservoir. They have an area aaround the cylinder that holds the brake fluid. See picture. The part on the kart will hold fluid but it is not a reservoir of fluid like on a car.

firestonekartinfo.com/?p=2236

You then screw the item with the fluid on the top. (see picture) Open the bleed screw and let gravity (or squeeze something on the bleeder) to force fluid through until it comes out clear and with no bubbles.

A type of bleeder is

www.accelerationkarting.com/brakebleedertool.aspx

Is your kart mastercylinder like the following?

www.accelerationkarting.com/crgmastercylinder.aspx

This does show a reservoir, and I think you will have to fill it, have someone hold the brake pedal down, and then release the pedal, just like bleeding car brakes.

[speedrome]

If you havent got one already check this out:Brake Bleeder on Norcal 4 cycle