|
|
Post by thinblueline1043 on Aug 26, 2010 23:29:48 GMT -5
First I would like to thank all of you for your help in the past. I'm getting close to having my kart done.. The only thing I need to do is drill out the jet and its done.. The drill I have is a little to big for the small bit it takes to get the job done so its off to HF in the morning to find a micro bit...
Can I start and ride this thing with out doing the jets because I'm at my wits end and I want to ride it ...
thanks Walt
|
|
|
|
Post by Mac on Aug 26, 2010 23:33:16 GMT -5
Walt! Come play at Davis this Sunday! We have a race but it will be small and definitely friendly  Terry |
|
|
|
Post by thinblueline1043 on Aug 26, 2010 23:54:41 GMT -5
Terry I work sunday night and need to ge all my safety stuff. I will see how Saturday goes and maybe i can get out there.
|
|
|
|
Post by norcalacr on Aug 27, 2010 9:21:36 GMT -5
You can run as is. I haven't drilled the jets on my clones yet.
|
|
cazman
Junior Member
Posts: 81
|
Post by cazman on Aug 28, 2010 23:14:49 GMT -5
I would recommend purchasing an array of jet sizes (6jets...#35-#40) from WMS Products, Inc for about $35. When you drill out jets/pills, you risk jeopardizing the 'flow' characteristics of the flow pattern in that particular jet. Therefore, losing integrity between jet sizes. 'Jst-my-2cnts'
|
|
|
|
Post by thinblueline1043 on Aug 29, 2010 2:49:46 GMT -5
Thank you for the jet info
|
|
