cazman
Junior Member
Posts: 81
|
Post by cazman on Nov 11, 2010 14:41:42 GMT -5
Does anybody have a scrap Clone crankshaft laying around with a 3/4" output shaft that they have no use for? Blue or Yellow ok! If so, pls contact me at "captcaz@yahoo.com"....thx
|
|
|
|
Post by brad42 on Nov 11, 2010 17:07:17 GMT -5
building stroker?
|
|
|
|
Post by scoots27 on Nov 11, 2010 17:20:45 GMT -5
He needs to be building an F-200, Brad
|
|
|
|
Post by brad42 on Nov 11, 2010 19:09:39 GMT -5
Because they generate scrap crankshafts? <evil grin>
|
|
cazman
Junior Member
Posts: 81
|
Post by cazman on Nov 11, 2010 23:02:06 GMT -5
I'm building a 2-cyl "BSP" motor so we can beat you guy's!! I need the output end of the crank to make a fixture to hold the clutch while I machine flats on the back side of the clutlch hub so that I can hold the crank stationary while removing and torquing the flywheel. If Animal or F-200 output shafts are the same as the Clone(s)....that is ok also.
|
|
