|
|
Post by Simon on Aug 25, 2013 20:23:14 GMT -5
Daniel would like to run a clone at the Reno night race. My old yellow kart is all refurbished and ready to race, but I need a motor.
I don't particularly want to buy a motor for a one off race, but if I can't beg borrow or steal one, he might have to run with us (but he actually wants to jump into the craziness of a clone crashfest again rather than running a detuned/restricted WF).
Obviously, if I borrow one and we blow it up, I'll replace it.
|
|
|
|
Post by RichH on Aug 26, 2013 19:20:31 GMT -5
Simon, you are welcome to mine. Not sure if it is legal anymore. Still has the CI flywheel, CL1 cam. Just have to remove the big pipe & 1:3 rockers
|
|
|
|
Post by Simon on Aug 28, 2013 0:34:12 GMT -5
Thanks Rich, but I think I might have this covered now. An NFRA member has offered the use of a motor. I can't mention names in case the motor loan sways my judgement in future KC hearings ... which of course it will !
|
|
|
|
Post by ron90 on Aug 28, 2013 12:43:22 GMT -5
Simon, you are welcome to mine. Not sure if it is legal anymore. Still has the CI flywheel, CL1 cam. Just have to remove the big pipe & 1:3 rockers Are you saying the CL1 cam is NOT legal? Or is it just the combination of CI flywheel and CL1 cam? |
|
|
|
Post by Brad Wunder on Aug 28, 2013 15:40:19 GMT -5
I can't mention names in case the motor loan sways my judgement in future KC hearings ... which of course it will ! Don't worry Simon, we ALLLL know now that you can be bought like a cheap suit!!! ;D |
|
|
|
Post by RichH on Aug 28, 2013 22:58:09 GMT -5
The CL1 cam is legal. It was my impression that the CI flywheel was not. Do you not need the billet steel flywheel? I put the big pipe & 1:3 rockers on it for the dirt track.
I've never seen Simon in any suit but a drivers suit. And might I say that he looked dam good in it! ;D
|
|
|
|
Post by Brad Wunder on Aug 29, 2013 10:23:42 GMT -5
And might I say that he looked dam good in it! ;D Allllllllright, what's the deal with sucking up? Did you do something KC worthy at Dixon that I missed?? Speaking of Dixon, I thought you got video of all 3 races? |
|
|
|
Post by ron90 on Aug 29, 2013 11:09:12 GMT -5
Do you not need the billet steel flywheel? You need a FW that complies with their rules. Not all Billet Steel flywheels are legal. Rule states "Flywheel must be billet steel, the BSFW-1 steel billet and the Speed Karts S1 steel billet wheels are legal @ 5 lbs 3 ozs. These are only approved flywheels." That rule was modified soon after the season started which removed some FW's from the allowed flywheels. Also I found out that several people raced the first few races with CL1 cam but stock flywheel which was in violation. But they were allowed because the 3 months that the rules were pending was not enough time to get a new flywheel. Don't get me started on that one. Luckily the racer(s) in Jr1Clone that did not have the proper flywheel finished in the back. |
|
